All Categories
Featured
Table of Contents
Laminated glass is frequently utilized in locations in the house most vulnerable to injury from human effect such as bathrooms, doors, around staircases and in areas near to the flooring (it meets the requirements of 'shatterproof glass' that is mandated for usage in these locations by Australian Basic AS 1288 Glass in buildings).
Toughened glass has been 'tempered' by being reheated and quickly cooled again. This procedure makes it much stronger than standard glass it can withstand higher impact loads before breaking. It likewise makes it more secure due to the fact that, when it does shatter, it breaks into numerous little cubic pieces instead of unsafe fragments.
Toughened glass has no thermal or acoustic benefits over other glass of the same toning or density. Secondary glazing is where single-glazed windows are retrofitted with a transparent acrylic or glass sheet connected to the inside of the frame or openable sash with a secondary frame or with magnetic strips.
Secondary glazing will not perform also thermally as a manufactured IGU, because it is impossible to absolutely seal the perimeter, but it can offer great sound control. Window movies are a thin polymer movie consisting of a soaking up dye or reflective metal layer, with an adhesive support. They stay with your glazing to alter its colour or make it reflective.
Applied to existing glass, some window films can cut in half the total SHGC of the window by absorbing and/or reflecting solar radiation. This can be particularly beneficial in hotter climates where cooling is the main concern, or on east and west elevations directly exposed to long durations of sunshine. Window movies might also minimize noticeable light transmittance.
For this factor, it is generally best to utilize an accredited installer of window film. Frames have a considerable effect on the thermal efficiency of windows and doors, because energy can be acquired and lost through the frame, as well as through the glass. Different types of frame will allow different levels of heat gain and loss, so cautious choice of frame is essential for efficient passive design.
Aluminium is also a very good conductor of heat and will reduce the insulating worth of a glazing system, unless specifically crafted to lower this. A 'thermally broken' frame is comprised of 2 aluminium sections connected by a structural insulator (normally a low-conductivity structural polymer). This 'breaks' the thermal connection through the aluminium and decreases the heat flowing through the frame.
Wood frames are a good natural insulator that can fit some home designs. Lumber frames need to be made from types that have naturally high toughness or be treated to avoid decay and contortion.
(weather condition stripping) is set up.
u, PVC doors and windows have exceptional thermal efficiency Image: Ben Wrigley (Light Home Architecture and Science) Composite frames utilize aluminium profiles on the external areas with either a lumber or u, PVC inner section. These combine the low maintenance and toughness of aluminium with much enhanced thermal efficiency.
Latest Posts
Diy Double Glaze in Koondoola WA
Glass Selector - Custom Single & Double Glazed ... in Midvale Perth
Does Double Glazing Keep Heat Out in Woodvale Western Australia